Flameless 1000W Magnetic Induction Heater with 8 Coils 2 Wires Kits Car Repair Tool Bolt Remover Mini Induction Heater EU PlugUSD 150.99-212.99/piece

Plastic Machine Manufacturer Supply 220V 6KW Induction Heating Machine For Plastic MoldingUSD 384.84/piece

3Kw 220V Electromagnetic Induction Heaters for Plastic Film MachineUSD 213.84/piece

10KW 10000W 3 phase 380V Industrial Electromagnetic Induction Heater with temperature meter for Plastic Processing MachineryUSD 586.00/piece

Technical Parameters:

Item	Technical Parameters
rated power	Three-phase 100KW
Rated input current	120-150(A)
Rated output current	240-260(A)
Rated voltage frequency	AC 380V/50Hz
Voltage adaptation range	constant power output at 300 ~ 400V
Adapt to ambient temperature	-20?C~50?C
Adapt to environmental humidity	¡Ü95%
Power adjustment range	20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 100KW)
Heat conversion efficiency	¡Ý95%
Effective power	¡Ý98%(Can be customized according to user needs)
working frequency	5~40KHz
Main circuit structure	Full bridge series resonance
Control System	The DSP-based high-speed automatic phase-locking tracking control system
Application mode	Open application platform
monitor	Programmable digital display
start time	<1S
Instantaneous overcurrent protection time	¡Ü2US
Power overload protection	130% instantaneous protection
Soft start mode	Fully electrically isolated soft start heating/stop mode
RS485 communication	Modbus RTU standard communication protocol
Support PID adjustment power	Identify 0-5V input voltage
Support 0 ~ 1000 ?C load temperature detection	Accuracy up to ¡À 1 ?C
Adaptive coil parameters	Double 35 square line, length 35m, inductance 85 ~ 100uH
Coil to load distance(Thermal insulation thickness)	20-25mm for circle, 15-20mm for the plane, 10-15mm for ellipse and within 10 mm for superellipse

100kW electromagnetic heating controller is specially designed for the application of pipeline heating and plane heating equipment, such as plastic machinery, food machinery, aluminum plastic machine, drum equipment, heating, boiler, oil, and natural gas transmission, etc. With stronger industry pertinence and better energy-saving effect, this product adopts the fifth generation DSP digital processing platform technology of our company, open application structure, wide inductance to adapt to the coil range, through the digital programmable control system, it can realize the special functions of different customers and different occasions, which brings great convenience to customers. It is an electromagnetic heating transformation project and supporting heating equipment Products.

1, Connect the power supply voltage of the cooling fan, but connect the 220V power when the fan is 220V, and connect the 380V power when the fan is 380V
2, Connected with cooling fan 220V / 380V (depending on the user, generally 380V)
3, When the external cooling fan is DC 24V, this interface is a switch that controls the 24V fan to work or stop. The two ends of the interface are actually the normally closed contact points of the relay output on the motherboard.
4, Dual AC 24V power supply (choose 4 or 5 when making half-bridge)
5, Dual AC 24V power supply (choose 4 or 5 when making half-bridge)
6, Single AC 16V power supply
7, Power indicator (red)
8, Work indicator light, flashing during standby, and always on (green) during work
9, External indicator light, led to the LED interface outside the chassis
10, The soft start interface is connected to the R / s interface outside the chassis (can be set to open or close work through F-20, factory default close work, open stop status
11, Finely adjust the power potentiometer. When there is a large deviation in power, this potentiometer can be adjusted appropriately.
12, 32-bit high-speed DSP processor
13, Externally connected programmable operating display
14, Isolated RS485 communication interface
15, External load temperature detection interface 1, with an accuracy of ¡À 1 ¡ã C (maximum 150 ¡ã C) single-channel, default 1 is used to measure external working temperature
16, External load temperature detection interface 2, with an accuracy of ¡À 1 ¡ã C (maximum 150 ¡ã C)
17,Multi-function input interface (set by F-20)
(1)10K input for external connection potentiometer can adjust the power range from 20% to 100%
(2)Externally connected PID input (0 ~ 5V) input
Do infrared thermometer or thermocouple conversion voltage 0 ~ 5V input to achieve the display temperature and control power size (up to 1000?C can be measured and displayed)
18, Connect the high-frequency Mutual inductor and pay attention to the direction. If the direction is reversed, the power is very small
19, IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)
20, IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)
21, Connected to high voltage DC bus
22, IGBT temperature sensor interface
23, IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)
24, IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)
25, Connected to high voltage DC bus
26,RS485 communication interface, connect A ,B
27, Externally connected K-type thermocouple
28, Externally connected 12V relay drives other required loads, synchronized with the fan start/stop of the machine