15KW high frequency igbt driver board magnetic induction heater control kit and parts for industrial heating
¥719.00
Discount
[new_user_coupon_discount_and_code]
15KW High Frequency IGBT Driver Board Magnetic Induction Heater Control Kit And Parts for Industrial heating
Technical Parameters
|
Item |
Technical Parameters |
|
Rated power |
15KW Three-phase 380V |
|
Rated input current |
15KW (20-22A) |
|
Rated output current |
15KW (60-70A) |
|
Rated voltage frequency |
AC 380V/50Hz |
|
Voltage adaptation range |
constant power output at 300 ~ 400V |
|
Adapt to ambient temperature |
-20?C~50?C |
|
Adapt to environmental humidity |
¡Ü95% |
|
Power adjustment range |
20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 15KW) |
|
Heat conversion efficiency |
¡Ý95% |
|
Effective power |
¡Ý98%(Can be customized according to user needs) |
|
working frequency |
5~40KHz |
|
Main circuit structure |
Half-bridge series resonance |
|
Control System |
DSP-based high-speed automatic phase-locking tracking control system |
|
Application mode |
Open application platform |
|
monitor |
Programmable digital display |
|
start time |
<1S |
|
Instantaneous overcurrent protection time |
¡Ü2US |
|
Power overload protection |
130% instantaneous protection |
|
Soft start mode |
Fully electrically isolated soft start heating / stop mode |
|
Support PID adjustment power |
Identify 0-5V input voltage |
|
Support 0 ~ 150 ?C load temperature detection |
Accuracy up to ¡À 1 ?C |
|
Adaptive coil parameters |
15KW 16 square line, length 25~30m, inductance 110 ~ 140uH |
|
Coil to load distance(Thermal insulation thickness) |
20-25mm for circle, 15-20mm for plane, 10-15mm for ellipse and within 10 mm for super ellipse |
Winding Method Of Coil:
According to the Electromagnetic induction heater inductance to make the coil turns for suitable the inductance.
most cases, the winding method is shown in the following
figure. Wrap the 15-20mm thick insulation cotton before winding, and
leave the 10-20cm interval for each section and then go around the next
section. The temperature probe of the thermostat can be fixed in the
interval. When a plurality of induction heaters are connected in
parallel, the coil spacing must be 20cm or more. If thicker insulation
is needed, please consult our company’s technical personnel.
figure. Wrap the 15-20mm thick insulation cotton before winding, and
leave the 10-20cm interval for each section and then go around the next
section. The temperature probe of the thermostat can be fixed in the
interval. When a plurality of induction heaters are connected in
parallel, the coil spacing must be 20cm or more. If thicker insulation
is needed, please consult our company’s technical personnel.
Contact US
